Home | Products | Technology | About | News | Support | Language |

English



Deutsch



Polski



中文
 
The
Ultra Silence Gen. ii
Series



Digital Links | Music Links | Speaker Links | A/C Links | Picture Gallery | Pricing | Top |


The Series

Just below our reference series, the Ultra Silence Gen. II series employs all the technical knowhow we have collected since 1994.
Our finest LCS silver-gold and LCS silver-copper conductor technologies are the key to the outstanding performance. Precision extruded PFA dielectric and special shielding technologies using pure silver and silver plated copper shields are rarely found in its price range.

The combination of LCS silver-gold and silver-copper conductors used in the Ultra Silence Gen. II Series is designed to give even greater purity and performance.
Silver is more stable than copper over the long term, and also conducts electrical signals better. Heavens Gate Audio’s proprietary formulation improves the natural silver wire by adding small pieces of gold.

The result is a detailed, glass-clear sound with extremely low distortion. Like all our products, these fine audio cables are proudly handmade in Germany.


Basic Features

LCS silver-gold and silver-copper conductors
extruded PFA dielectric
quad-matrix-design
triple shield construction
99,99% pure copper contacts
rhodium-over-silver plated (PVD technology)



Digital Links
The Ultra Silence Gen. II digital interconnects offer exemplary signal transfer and perfect jitter suppression resulting in an excellent performance.
These Digital Links are produced using a ‌Precision Matched Impedance cable geometry, where tolerances of the conductor surface, dielectric extrusion and the precision of the braided shields are held to minute variances.
Pulse timing is very critical to digital transmission accuracy. It is important that a digital connector’s impedance precisely match the cable's characteristic impedance. A mismatched connector will create signal reflections which increases digital jitter or phase noise. A 75-ohm cable requires a 75-ohm termination — not the commonly used 55-ohm connector. At Heavens Gate Audio we are careful to ensure that every cable and every connector are precisely matched for a seamless component to component connection.
Available are precisely manufactured RCA, XLR and USB plugs.

SPECIFICATIONS

LCS silver-gold and silver-copper conductors
extruded PFA dielectric
coaxial (75 Ohm) / twisted-pair (110 Ohm) / 3 x twisted-pair (USB)
triple shield construction
99,99% pure copper contacts
rhodium-over-silver plated (PVD)
RCA, XLR, USB type A, USB type B)

Music Links
The Ultra Silence Gen. II Music Links will free a superior audio system to provide unexpected levels of musical involvement when the music starts to play.
These fine audio cables are for discerning individuals who demand even more performance and precision than our Ultra Supreme series Interconnects offer. If you already have a very high-level system and you are not planning on costly key component upgrades in the near future, these interconnects will help you to extract the last measure of performance from your existing investments.
The Ultra Silence Gen. II collection is a significant performance upgrade compared to Ultra Supreme Gen. II Interconnects because all components are specifically chosen and matched more closely to suit the electrical characteristics of the cable at any length.
The passive network itself is also calibrated more precisely to the electrical characteristics like inductance and capacitance.
Beautiful rhodium-plated RCA and XLR connectors make superior contact with terminations and are capable of transferring more power.
The result is an exceptional audio performance and an excellent noise reduction.

SPECIFICATIONS

2 LCS silver-gold and 2 silver-copper conductors
extruded PFA dielectric
quad-matrix-design
triple shield construction
99,99% pure copper contacts
rhodium-over-silver plated (PVD)
RCA, XLR, 5-Pol phono





Speaker Links
Your music signal is perhaps more influenced by the speaker cable than by any other cable in your system.
There are simply more elements within the cable’s design that are critical when improving the overall sound of your system.
The Ultra Silence Gen. II Speaker Links are totally made by hand in our factory. Starting with 12 solid LCS silver-gold conductors aligned to a 3 x 4 Matrix geometry, some of these conductors are connected to the various shields at exact defined points. This unique construction allows us to control the cable’s capacitance and inductance independently from the entire lengths.
After construction, we treat the entire cable on a big Tesla Coil, a device that uses resonant circuits and alternating current to produce extremely high voltages. This procedure enhances the cable's ability to transmit signals without loss or degradation.
These fine Speaker Links are terminated with precision machined pure copper plugs, offering a rhodium-over-silver plating.
The result is a perfect overall balance, relaxed and yet dynamic and detailed as the most analytical cables on the market, but with the musicality of cables that gloss over dynamics and detail.
With the Ultra Silence Gen. II Speaker Link you won’t have to compromise between accuracy and musicality, you simply get it all. You will hear all the frequency and phase detail in perfect time alignment and this makes them the most holographic and realistic sounding speaker cables in its price range.

SPECIFICATIONS

6 LCS silver-gold and 6 silver-copper conductors
extruded PFA dielectric
triple quad-matrix design
triple shield construction
Tesla Coil treatment
99,99% pure copper contacts
rhodium-over-silver plated (PVD)
Spade, Banana

A/C Links
Heavens Gate Audio achieved sustained success over many years with the original Ultra Silence Series introduced in 2004. Audiophiles should be curious about what’s coming when Heavens Gate Audio introduces a new Ultra Silence Series.
A mixture of special made Silver-Copper conductors and Silver-Gold conductors are used for the Ultra Silence Gen. II Series.
These conductor materials are annealed in a special way to provide a long crystal structure as well as an extremely smooth and uniform surface. The surface of the conductor materials is polished right after the annealing process in order to avoid any oxygen that might result in unwanted distortions. Extruded PFA (Perfluoralpoxy-Polymere) is used for the insulation of the conductors offering even better dielectric properties than PTFE.
12 conductors are arranged into a special Matrix to control the inductance and the capacitance of the entire cable.
Three different shields are used to protect the signal against unwanted noise.
The plugs used for the Ultra Silence Gen. A/C Link offer Oxygen Free Copper contacts, silver plated and rhodium plated.
The tonal purity and the frightening impulse response may irritate in the beginning – presuming a weakness at the lower frequencies. Careful listening will debunk this as a fallacy, because the speed and precision of this cable allow a clean, tight and dynamic reproduction of the lowest frequencies unexperienced so far.

SPECIFICATIONS

4 LCS silver-gold conductors for Phase
4 LCS silver-copper conductors for Neutral
4 LCS silver-copper conductors for Ground
extruded PFA dielectric
triple quad-matrix-design
triple shield construction
99,99% pure copper contacts
rhodium-over-silver plated (PVD)
U.S., Schuko, 16 Amp., 20 Amp.




Picture Gallery

1 / 9
2 / 9
3 / 9
4 / 9
5 / 9
6 / 9
7 / 9
9 / 9
9 / 9

Ultra Silence Gen. II Digital Link RCA
Ultra Silence Gen. II Digital Link XLR
Ultra Silence Music Link RCA
Ultra Silence Music Link XLR
Ultra Silence Music Link XLR
Ultra Silence Music Link
Ultra Silence Speaker Link
Ultra Silence A/C Link
Ultra Silence A/C Link

Pricing

Digital Links

RCA

1.00 Meter

1.000,00 EUR

XLR

1.50 Meter

1.250,00 EUR

BNC

2.00 Meter

1.500,00 EUR

USB

2.50 Meter

1.750,00 EUR

3.00 Meter

2.000,00 EUR

add. 0.50 Meter

250,00 EUR

 

Music Links

RCA

1.00 Meter

1.200,00 EUR

XLR

1.50 Meter

1.500,00 EUR

Phono

2.00 Meter

1.800,00 EUR

2.50 Meter

2.100,00 EUR

3.00 Meter

2.400,00 EUR

add. 0.50 Meter

300,00 EUR

 

Speaker Links

Spade

1.00 Meter

1.200,00 EUR

Banana

1.50 Meter

1.500,00 EUR

2.00 Meter

1.800,00 EUR

2.50 Meter

2.100,00 EUR

3.00 Meter

2.400,00 EUR

add. 0.50 Meter

300,00 EUR

 

Bi.Wire Jumper

Spade - Banana

0.20 Meter

600,00 EUR

 

A/C Links

Schuko

1.50 Meter

1.200,00 EUR

U.S.

2.00 Meter

1.450,00 EUR

16 Amp.

2.50 Meter

1.700,00 EUR

20 Amp.

3.00 Meter

1.950,00 EUR

add. 0.50 Meter

250,00 EUR